ZD-700 FULLY AUTOMATIC AUTO BAG MAKING MACHINE with 5mm or 10mm width seal ,
with roll to roll and roll to box collection function
with roll to roll and roll to box collection function
A.main technology parameter
MATERIAL: HDPE,LDPE
Suitable for Courier automatic packaging bags
Unwind width <=700mm unwind dia. <=1000mm
Bag making speed 400mm 60-70Pcs/minutes(depend on the material of bag)
Mechanical speed 120Pcs/minute
Bag making width <=600mm Bag making length :<=600mm
Electric power 220-380V 50HZ
Total power 7Kw
Machine weight :2.3 tons
Machine color:white and red
Air source : from customer
(dimension):7500*1400*1600
B,main Mechanical parameter
Machine frame use by steel plate, steel structure.
Unwind part: rubber roller by air cylinder press
Control type use by dancer store device ,High precision potentiometer control
Unwind shaft :air shaft
Unwind type :automatic loading material by air cylinder
Unwind tension:automatic tension control
Unwind with Analog type EPC.and with alarm device for remind change roller before fished last web
Infeed parts:Rubber roller by spring, friction drive
Drive type:Full Digital AC servo system.
Transmission mode: synchronous belt and synchronous wheel drive servo ratio 1:2.5
Detection method: color code sensor.
Main transmission parts: structure using crank rocker push-pull type two link .
Main motor use by 2.2Kw Taiwan motor with 2.2Kw invert from Panasonic,Japan3
Main control center use by PLC ,touch screen ,showing for bag making speed ,setting bag length ,Automatic
counting
hot knife
part :choose by copper knife on under and top,the hot knife can be move from front and
behind.adjust type :by hand .
Heating type :heating in middle ,alone control.
Control type :Temperature-controlled meter ,PID adjustment ,solid-state relay driver
Detection type :thermocouple
temperature setting range: 0-400 °C
Temperature measuring points: in middle of hot knife.
Tearing line device
Cooling type:by colling water
Cool press board one set :make by oxidation aluminum alloy, can be cool by water in inside
10.open one layer
Use by rubber roller
Roller device use by 0.37KW servo motor
11.
Holder cool device :make by oxidation aluminum alloy, can be cool by water in inside.
12.Automatic positioning device
Automatic control by PLC ,precision<=0.5mm
Reflection type photoelectric sensor tracking detection,precision<=0.5mm
Photoelectric sensor:0-20mm(can be setting)
Fixed compensation range :±1-±10mm(can be setting )
Positioning Correct way :PLC control servo motor
13. Pouch device 2 sets
Structure:Made by sheet steel board and round steel
14.Retainer plate 2sets
Structure:Made by sheet steel board and round steel
15.Change roller alarm device:use by infrared correlation and photoelectric sensor
16. Waste take out device can take out waste depend on setting time
17.rewind
Outfeed part:1.1kw vector motor with invert
Rewind tension : 2.0KW AC servo motor
Tension control:Automatic constant tension control, simulate rectifying automatic tracking system.
Rewind :air shaft .automatic unload
Contact info :
Linly